APPLICATION
The factory of BTMark be founded in 2003 which focused on marking and printing Machines.
Language
The factory of BTMark be founded in 2003 which focused on marking and printing Machines.
With the improvement of people's living standards, the requirements of the product packaging is also increasingly high, these are directly linked to Industrial inkjet printer, about the installation process encountered in the problems, many operators know little, the following is to share for you to pay attention to what problems should be installed.
With the improvement of people's living standards, the requirements of the product packaging is also increasingly high, these are directly linked to Industrial inkjet printer, about the installation process encountered in the problems, many operators know little, the following is to share for you to pay attention to what problems should be installed.
First,Environment and location
1. Installation of the transmission device to be smooth (to prevent vibration) must ensure that the items to be printed smoothly through the assembly line.
2. Pay attention to the installation of equipment when the voltage should be stable, not a sudden power failure!
3. environment using stable voltage and current, avoid instantaneous high voltage and interference, but also try to avoid sudden power failure.
4. Do not install in the vicinity of electromagnetic field radiation area.
Second,the object being printed to maintain a certain distance from the print being printed products and products to maintain a certain distance between them, do not lean together or stacked together to avoid the infrared sensor can not work properly. Printhead and the object to be sprayed should be maintained in the range of 1-5mm.
Third, the position between the printhead and the cartridge in the installation of the printhead, pay attention to the horizontal position between the Industrial inkjet printer printhead and the cartridge: the horizontal distance of 30mm-50mm range is good; if the printhead installation position is lower than 30mm, then the ink will leak from the printhead; if the printhead installation position is higher than 50mm, then the printer will not be able to print.
Fourth, check the installation is complete. Before printing, insert the ink cartridge → turn on the power switch → clean the printhead → download the edited file into the machine.
Installation and commissioning are very important, will directly affect its normal and stable work, so these above elements are very important, we need to understand.
