APPLICATION
The factory of BTMark be founded in 2003 which focused on marking and printing Machines.
Language
The factory of BTMark be founded in 2003 which focused on marking and printing Machines.
When the Continuous inkjet printer scattered condition occurs, we must first rule out whether it is caused by unstable product delivery, and if it is caused by unstable delivery, you only need to adjust the delivery device.
When the Continuous inkjet printer scattered condition occurs, we must first rule out whether it is caused by unstable product delivery, and if it is caused by unstable delivery, you only need to adjust the delivery device. After excluding the case of unstable conveying, we start from the printhead, and start to solve the problem step by step in a targeted manner. If the nozzle is due to the spray hole blocked, but not completely blocked, thus leading to the spray hole print out of the ink droplets are no longer straight, so the content of the spray print scattered, just need to clean the nozzle on it.
There may also be due to the printhead voltage is too high, resulting in an increase in the strength of the print, and it just happens to print the material is relatively hard, it is only necessary to adjust the voltage can be lower.
If the printing interval is too long, it will also lead to printing scattered phenomenon, if the printhead of the printer is aging, can not reach the high interval of printing, may also produce the phenomenon of scattered printing.
In the use of Continuous inkjet printer, you also need to pay attention to not mix different inks, otherwise there is also a risk of blocking the printhead of the printer, affecting the normal work.
