The factory of BTMark be founded in 2003 which focused on marking and printing Machines.

Language
APPLICATION
VR

UV laser marking machine working environment and common problems

In the use of UV laser marking machine good temperature heating to between 20 ℃ to 40 ℃, only this temperature range to ensure that the inkjet printer ink smooth, clear printing, too high or too low temperature will lead to inkjet printer failure or a certain impact on printing.



December 17, 2022

In the use of UV laser marking machine good temperature heating to between 20 ℃ to 40 ℃, only this temperature range to ensure that the inkjet printer ink smooth, clear printing, too high or too low temperature will lead to inkjet printer failure or a certain impact on printing.


The impact of temperature on UV laser marking machine

1. The ideal working temperature of the printer in about 20-40 degrees, low and high will affect the machine's ink viscosity, resulting in poor printing results.

2. After using the printer for a long time the temperature of the printer will rise, so the need to use the water cooler, the role of the water cooler is to cool the UV high-speed printer UV lamp.

3. Many users will have such doubts, the general case of water chillers water cooling temperature to how many degrees appropriate it? According to the experience of the special domain chiller, the water temperature of the chiller is set at 20-30 degrees. The chiller temperature control effect is achieved.


UV laser marking machine prone to problems and solutions

1. If the use of UV laser marking machine in the process of leakage of spray phenomenon please check.

(1) check the sensitivity of the photoelectric sensor.

(2) check the distance between the two print objects, whether greater than the distance between the photoelectric sensor detection point and the nozzle.

2. If you find that the UV laser marking machine printing content is incomplete, you can solve the following method: when editing the information will be the starting position of the cursor back one frame, and then edit the content will not appear again the above problem.

3. When the content of the print is blurred, please check: whether the distance between the printhead and the printed product is too high. Printing distance is 5-6mm, such as the distance is too high, please adjust the height of the nozzle.

4. When the printer nozzle clogging solution: When the printer is used in the process of finding a slim nozzle clogging, and has affected the printing effect, should be stopped early, suspend the ink after squeezing the ink, test the nozzle of each nozzle is in a smooth situation, and then test the effect of printing can be.


Basic Information
  • Year Established
    --
  • Business Type
    --
  • Country / Region
    --
  • Main Industry
    --
  • Main Products
    --
  • Enterprise Legal Person
    --
  • Total Employees
    --
  • Annual Output Value
    --
  • Export Market
    --
  • Cooperated Customers
    --

Send your inquiry

Chat with Us

Send your inquiry

Choose a different language
English
Türkçe
فارسی
русский
Português
Pilipino
日本語
italiano
français
Español
Deutsch
العربية
bahasa Indonesia
Current language:English